Residential

Free Home Electrical Safety Check

Free A visual safety check of the system you already have — no charge, no obligation

Free estimate

Get your price

Four fields. We call back the same day with a written range.

A no-charge visual check of your home's electrical system — panel, grounding, outlets, GFCI and AFCI protection, smoke alarms and visible wiring. Roughly 45 minutes, written findings, no obligation.

CCB #244602WA UBI 604467072Licensed & insuredNo charge, no obligation

Trusted by

Companies we've worked with

Free Home Electrical Safety Check

Most electrical problems in Portland and Vancouver homes announce themselves long before they become an emergency: a panel brand with a known recall history, a bathroom without GFCI protection, ungrounded two-prong outlets on a circuit someone later added to, smoke alarms past their ten-year replacement date. None of that is visible from the couch, and none of it is urgent enough to make anyone pick up the phone.

So we look for free. A licensed electrician spends about 45 minutes going through the system — the panel and its labelling, the grounding and bonding, protection on the circuits that are required to have it, the condition of visible wiring and devices, and the smoke and CO alarms. You get the findings in writing, sorted into what is a genuine safety issue, what is worth planning for, and what is fine as it is.

There is no obligation attached and no charge if you decide the answer is "nothing for now". We do this because a written picture of your system is the most useful thing we can hand a homeowner, and because roughly one in four homes in this metro predates 1940 — there is usually something worth knowing.

Who this is for

You've just bought an older home and want to know what you actually inherited before something goes wrong

Your panel is a Federal Pacific, Zinsco, Challenger or Pushmatic and you've read enough to be uneasy

You're planning a heat pump, EV charger, hot tub or kitchen remodel and want to know whether the service can carry it

Breakers hold and everything works, but the house is old enough that you'd rather find out on your terms than at 2am

What's included

  • Panel condition, labelling and breaker sizing
  • Panel brand check against known recall and failure history
  • Grounding and bonding, including the grounding electrode
  • GFCI protection in kitchens, baths, garage, exterior
  • AFCI protection on required circuits
  • Two-prong and ungrounded outlets
  • Visible knob-and-tube and aluminum branch wiring
  • Service capacity against what you plan to add
  • Smoke and carbon monoxide alarm age and placement
  • Written findings, sorted by urgency

Why Power Professor

What you get besides the work

5-year labor warranty

In writing, on every install. Parts keep the manufacturer's own warranty on top of it.

Permit and inspection included

We pull the permit, book the inspection and meet the inspector. It's in the price, not on top of it.

Licensed in Oregon and Washington

CCB #244602 in Oregon, UBI 604467072 in Washington. Fully insured on both sides of the river.

700+ jobs in the last two years

Seven years on Portland and Clark County electrical.

Read our Google reviews →

What it costs

Free A visual safety check of the system you already have — no charge, no obligation

  • Home electrical safety check Free

    About 45 minutes. Written findings. Nothing is opened up, nothing is dismantled, and nobody is going to lean on you at the end of it.

  • Diagnosing a specific fault $250 minimum

    Something tripping, dead, buzzing or smelling hot is a service call, not a safety check — see Electrical Troubleshooting. The $250 comes off the bill if you go ahead with the repair.

  • Any work that comes out of it Quoted in writing

    Priced before we start, permit and inspection included, and covered by our five-year warranty on labor.

The honest boundary: a safety check tells you the condition of what's installed. It does not include tracing a fault. If something in your house is actively misbehaving, book a service call instead — you'll get an answer faster and you won't pay twice for the same visit.

These ranges are a starting point, not a quote. The exact price for your job can only be set after we talk it through — call or send the form and you’ll have it as a free written estimate before any work starts.

Offered on residential property in our Portland metro and Clark County service area. One check per address.

How it works

From first call to finished job

Reach out

Call our 24/7 line or send a message — tell us what's going on and where.

Free estimate

We assess the job and give you clear, transparent pricing before any work starts.

We get to work

Licensed, IBEW-trained crews arrive on schedule and handle it to code.

Job done right

We test everything, clean up after ourselves, and we're a call away if you need us again.

Coverage

Where we offer Free Home Electrical Safety Check

Pricing

Straightforward, upfront pricing

Where we have real numbers, we publish them: the ranges on our service pages come from our own paid invoices, not from a calculator. Your exact price comes after we talk — free, in writing, before any work starts.

  • Free, no-obligation estimates on planned work — panels, EV chargers, remodels, commercial
  • A written quote before any work begins
  • Permit and inspection are part of the job, not a line item added later
  • Repairs and fault-finding are a $250 service visit — the trip plus the first hour of work
  • Emergency call-outs start at $400, day or night, and you hear the number before we roll

Answers

Free Home Electrical Safety Check FAQ

01What's the catch?
There isn't one, but it's fair to ask. We do this because it puts a licensed electrician in front of a homeowner who has an older house, and often enough there's work worth quoting. If there isn't, you've still got a written picture of your system and we've spent 45 minutes. Nobody is going to pressure you at the end.
02Is this the same as the $250 diagnostic?
No, and the difference matters. A safety check assesses the condition of what's already there. A diagnostic traces a specific fault — a breaker that keeps tripping, an outlet that's dead, a light that flickers. Tracing takes as long as it takes, which is why it's a paid service call with a $250 minimum. If you go ahead with the repair, that $250 comes off the bill.
03Will you fix things during the inspection?
Not as part of the free visit. If we find something small and you want it handled on the spot, we'll price it before touching it — that becomes a service call. Anything larger gets quoted in writing so you can think about it.
04Is this a code inspection?
No. Code compliance is determined by the city or county inspector, and only they can sign off on it. This is an electrician's assessment of condition and safety, which is a different thing and carries no legal weight. Where we think something wouldn't pass, we'll say so and explain why.
05Do you do this for rentals or commercial buildings?
The free check is for residential property in our service area. For rental portfolios and commercial buildings we do paid condition surveys, which are more thorough and produce a document you can act on with a budget — ask and we'll scope it.
06How long does it take and do I need to be there?
About 45 minutes, and yes, ideally. Half the value is the conversation while we're looking — what you're planning, what the house has done in the past, what that one weird outlet has always been like.

Ready for reliable power?

Still have questions? Get in touch today.

Call for immediate help or send a message for a free, no-obligation estimate.